Manufacturers of Bolted Globe Valve

Straight_Globe-Valve-Cast-Steel
Globe valves are outside screw & yoke type, bolted bonnet, rising stem and hand wheel. Valves are highly efficient for services requiring frequent operation and throttling. The internal passage within the valve diverts flow through 90° changes of direction resulting in pressure drop and turbulence. Globe valves are generally considered where moderate control or regulation of flow is required.

Globe valves are adequate for all service media. The Globe Valves is generally faster to operate due to less travel. But requires much force to operate compared to Gate valves.

RANGE

Valve TypeClass RatingSize Range
Globe150#2″ to 24″
Globe300#2″ to 24″
Globe600#2″ to 12″

DESIGN STANDARDS

DESIGN STANDARD:BS 1873
TESTING STANDARD:BS EN 12266-1
FACE TO FACE:ASME B 16.10
END CONNECTION:Flanged End – ASME B 16.5
Butt Weld End – ASME B 16.25
PRESSURE – TEMPERATURE CHART:ASME B 16.34

MATERIAL

STRUCTUREEnd ConnectionFlanged End Raised Face, Butt Weld End, RTJ,. ETC
OperationHand wheel, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic
MATERIALShellWCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu,
Hastelloy, Inconel, Duplex Stainless Steel
Trim13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel